X-Git-Url: http://git.linux-vserver.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=doc%2Fconfiguration.xml;h=fc7416fadd4a11f1745b6b9ddbaac62c4ee40c69;hb=710b574e268ecfa9705ac7c73332362da9563fbd;hp=07b506f8b8f7d5a79267467b3d670a051a3ba6e2;hpb=f5dbe45b60edf550f856188fa9e837a34d43a2e6;p=util-vserver.git
diff --git a/doc/configuration.xml b/doc/configuration.xml
index 07b506f..fc7416f 100644
--- a/doc/configuration.xml
+++ b/doc/configuration.xml
@@ -62,6 +62,34 @@ NOTE: this link exists in 0.30.202+ only; in previous versions it was
a vserver specific setting.
+
+
+
+Contains the pathname of the shell which will be used by the "vserver
+... enter" command. Can be overridden by the
+per-guest shell.
+
+
+
+
+
+The default fstab file to put in newly built guests.
+
+
+
+
+
+If this file exists, kernel-side dynamic contexts will be used by the "vserver
+... build" command. Otherwise a context will be generated, based on the
+contents of context.next.
+
+
+
+
+
+The context id to use for the next guest created by "vserver ... build".
+
+
@@ -89,6 +117,33 @@ from this uri and install it at a temporary place.
+
+
+ 'x' is an arbitrary name, replace it with e.g. device names
+
+ When this file exists, the device can be opened
+
+
+ When this file exists, the device can be created (if the guest has CAP_MKNOD)
+
+
+
+When this file exists, target will
+have to exist as well and opening the device will in fact open the target device
+
+
+
+ This file will let you specify unimplemented flags manually
+
+
+ Contains the name of a device node
+
+
+ Contains the device node of the target node to open instead of the device when remap is set
+
+
+
+
@@ -101,7 +156,7 @@ is invoked from the kernel. This should point somewhere e.g. into
-See vshelper/action.
+See vshelper/action.
@@ -204,6 +259,14 @@ When this file exists, vlogin isn't used on vserver <guest> enter.
+
+
+
+
+A list of default options to supply to vserver ... build, one option per line.
+
+
+
@@ -214,6 +277,79 @@ interface will be executed.
+
+
+ This directory contains some files which will be copied to the guests during build.
+
+ The default /etc/hosts file.
+
+
+ The default /etc/nsswitch.conf file.
+
+
+ The default /etc/krb5.conf file.
+
+
+ The default /etc/krb.conf file.
+
+
+ The default /etc/krb.realms file.
+
+
+ The default /etc/ldap.conf file.
+
+
+ The default /etc/localtime file.
+
+
+ The default /etc/resolv.conf file.
+
+
+
+
+
+This directory contains cgroup settings which should be applied to all guests.
+See your kernel documentation for what settings are valid with your
+configuration.
+
+
+
+The directory to mount the cgroup hierarchy at. The default is /dev/cgroup.
+
+
+
+
+List of subsystems to enable on the cgroup mount point. The default is "all".
+
+
+
+
+Some subsystems start out with clean slates, making it impossible to use the
+cgroup before certain things have been set. This is true for e.g. the cpuset
+subsystem. This file contains a list of filenames which should be explicitly
+inherited from the parent (root) cgroup, if not overridden elsewhere.
+The default is cpuset.cpus and cpuset.mems.
+
+
+
+
+If this file exists, all guests will be put in one cgroup named after the
+contents of this file. The default is to put each guest in a cgroup named the
+same thing as the guest.
+
+
+
+
+If this file exists, all cgroups will be created underneath this directory
+in the cgroup mount point.
+
+
+
+
+If this file exists, each subsystem will have its own mount point.
+
+
+
@@ -321,6 +457,11 @@ this distribution.
+
+
+Symlink to the default template for this distribution.
+
+
@@ -364,13 +505,20 @@ url="http://svn.linux-vserver.org/svn/util-vserver/trunk/lib/ccaps-v13.c">lib/cc
for possible values.
-
+
Contains the network capabilities. See lib/ncaps-net.c
for possible values.
+
+
+Contains the namespaces allowed to be unshared. See lib/umask-v23.c
+for possible values.
+
+
@@ -471,7 +619,7 @@ Contains per line a capability. This file is used for the 2.4 kernel
only; for 2.6 use bcapabilities.
-
+
Contains the pathname of the shell which will be used by the "vserver
... enter" command.
@@ -485,53 +633,19 @@ is the personality-type followed by flags (one item per line). See
values.
-
+
Contains per line a flag. See lib/cflags-v13.c
for possible values.
-
-
+
+
+Old name for cflags. Deprecated.
+
+
+
Contains a network flag per line. See lib/nflags-net.c
@@ -540,9 +654,19 @@ for possible values.
-Contains the context which shall be used for the vserver.
+Contains the context id which shall be used for the vserver. Valid range is 2 through 49151.
+
+
+Contains the network context id which shall be used for the vserver. Valid range is 2 through 49151.
+
+
+
+
+Contains the filesystem tag which shall be used for the vserver. Valid range is 2 through 49151.
+
+
The fstab file for the vserver. Entries in this file will be mounted
@@ -555,11 +679,16 @@ the 'fstab' file should be used.
The fstab file for the vserver. Entries in this file will be mounted
-within the network context of the host; this means that mount will be
+within the network context of the guest; this means that mount will be
called as chbind <options> mount .... See
fstab also.
+
+
+Contains the bias to be applied to processes in this guest when the OOM-killer strikes.
+
+
@@ -674,7 +803,34 @@ pair per line.
-
+
+
+
+ 'x' is an arbitrary name, replace it with e.g. device names
+
+ When this file exists, the device can be opened
+
+
+ When this file exists, the device can be created (if the guest has CAP_MKNOD)
+
+
+
+When this file exists, target will
+have to exist as well and opening the device will in fact open the target device
+
+
+
+ This file will let you specify unimplemented flags manually
+
+
+ Contains the name of a device node
+
+
+ Contains the device node of the target node to open instead of the device when remap is set
+
+
+
+
30
@@ -685,7 +841,7 @@ assumed.
-
+ restart
The action which is going to be executed when a vshelper event
@@ -742,7 +898,7 @@ skipped.
-See vshelper/action.
+See vshelper/action.
@@ -1115,10 +1271,13 @@ The name of the current vserver.
- The default broadcast address.
+ The guest's broadcast address.
+
+
+ The guest's loopback address.
- The default network device.
+ The default network device. See iface/dev for more information.The default network prefix-length.
@@ -1157,13 +1316,10 @@ numbers like '00' are good names for these directories.
- The ip which will be assigned to this interface.
-
-
- The broadcast address.
+ The IP address which will be assigned to this interface.
-
- The network device.
+
+ The network device. When this is specified, the IP address will be assigned and removed when starting and stopping the guest.The network prefix-length.
@@ -1203,6 +1359,52 @@ When this file exists, the steps which setup and destroy a VLAN
interface will be executed.
+
+
+When this file exists, a tun interface will be created when the guest
+starts, and removed when the guest stops.
+
+
+
+
+When this file exists, a tap interface will be created when the guest
+starts, and removed when the guest stops.
+
+
+
+
+If a tun or tap interface is created, the presence of this file will
+disable checksumming on it.
+
+
+
+
+When this file exists, the tun/tap interface created will not be
+owned by this particular guest.
+
+
+
+
+Sets the ownership of tun/tap interfaces. Requires a user id, not a
+username.
+
+
+
+
+Sets the group ownership of tun/tap interfaces. Requires a group id,
+not a group name.
+
+
+
+
+Sets the link type of tun/tap interfaces.
+
+
+
+
+Sets the peer for a point-to-point link, such as a tun interface.
+
+
@@ -1293,7 +1495,11 @@ tools and can *not* be modified.
-
+
+Note that all entries are required for the disk limit to be applied.
+
+
+ 'x' is an arbitrary name, replace it with e.g. integersThe directory to which the limit should be applied
@@ -1309,7 +1515,22 @@ tools and can *not* be modified.
+
+
+ 'x' is an arbitrary name, replace it with e.g. integers
+
+ The sysctl setting
+
+
+ The value
+
+
+
+
+
+Puts the guest in a cpuset. Required entries are name, cpus and mems.
+ The name of the cpuset for this vserver
@@ -1395,5 +1616,50 @@ tools and can *not* be modified.
+
+
+
+ Enables pid virtualization for this guest
+
+
+ Enable network virtualization for this guest
+
+
+ Contains a mask of spaces to clone/enter
+
+
+
+
+
+ The IO scheduling class to use for this guest (see ionice(1)).
+
+
+ The IO scheduling priority to use for this guest (see ionice(1)).
+
+
+
+
+
+This directory contains cgroup settings to be applied to this guest.
+See your kernel documentation for what settings are valid with your
+configuration.
+
+
+
+If this file exists, the guest will be put in a cgroup named after the
+contents of this file. The default is to name the cgroup the same thing as the
+guest, unless
+.defaults/cgroup/name says
+otherwise.
+
+
+
+
+
+If this file exists,
+.defaults/cgroup will be ignored
+for this guest.
+
+