X-Git-Url: http://git.linux-vserver.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=doc%2Fconfiguration.xml;h=7367b9d02710478030e9c69461a4deec1e364c7b;hb=781214f92e4430e819906c698723e66f5def8883;hp=323aaee990ab7d837d59782eaab6d3f7ea6cae1a;hpb=4cc6746ff2ab2c7e32e7bc20111cec287a4fb113;p=util-vserver.git diff --git a/doc/configuration.xml b/doc/configuration.xml index 323aaee..7367b9d 100644 --- a/doc/configuration.xml +++ b/doc/configuration.xml @@ -37,14 +37,20 @@ the 'barrier' attribute. Else, common chroot(2) exploits are possible. - + -Enable namespace cleanup globally. It can be overridden for a single vserver -by setting the nonamespace-cleanup flag +Disable namespace cleanup globally. It can be overridden for a single vserver +by setting the namespace-cleanup flag there. + + +List of paths to skip during namespace cleanup. + + + Path of the vserver run reverse directory. This directory contains @@ -56,12 +62,40 @@ NOTE: this link exists in 0.30.202+ only; in previous versions it was a vserver specific setting. + + + +Contains the pathname of the shell which will be used by the "vserver +... enter" command. Can be overridden by the +per-guest shell. + + + + + +The default fstab file to put in newly built guests. + + + + + +If this file exists, kernel-side dynamic contexts will be used by the "vserver +... build" command. Otherwise a context will be generated, based on the +contents of context.next. + + + + + +The context id to use for the next guest created by "vserver ... build". + + /vservers/.pkg - + The default apt.conf which is going to be used. It is overridden by distribution specific configuration file. @@ -83,6 +117,33 @@ from this uri and install it at a temporary place. + + + 'x' is an arbitrary name, replace it with e.g. device names + + When this file exists, the device can be opened + + + When this file exists, the device can be created (if the guest has CAP_MKNOD) + + + +When this file exists, target will +have to exist as well and opening the device will in fact open the target device + + + + This file will let you specify unimplemented flags manually + + + Contains the name of a device node + + + Contains the device node of the target node to open instead of the device when remap is set + + + + @@ -95,7 +156,7 @@ is invoked from the kernel. This should point somewhere e.g. into -See vshelper/action. +See vshelper/action. @@ -125,7 +186,7 @@ skipped. -A list of files which will be made visibly by vprocunhide. Wildcards are +A list of files which will be made visible by vprocunhide. Wildcards are allowed and anything ending in '/' will be processed recursively. When this file exists, it overrides the defaults in SYSDEFAULTDIR/vprocunhide-files. The entries there must be absolute filenames inclusive the leading '/proc'. @@ -140,6 +201,13 @@ A symlink to the TTY device where input/output will be redirected from/to at startup via initscript. + + + +The environment to set when starting guests. Contains one VAR=VAL +pair per line. + + @@ -183,6 +251,59 @@ operation will fail. Most tools assume 'on' as the default value. + + + + +When this file exists, vlogin isn't used on vserver <guest> enter. + + + + + + + +A list of default options to supply to vserver ... build, one option per line. + + + + + + + + +When this file exists, the steps which setup and destroy a VLAN +interface will be executed. + + + + + + This directory contains some files which will be copied to the guests during build. + + The default /etc/hosts file. + + + The default /etc/nsswitch.conf file. + + + The default /etc/krb5.conf file. + + + The default /etc/krb.conf file. + + + The default /etc/krb.realms file. + + + The default /etc/ldap.conf file. + + + The default /etc/localtime file. + + + The default /etc/resolv.conf file. + @@ -223,9 +344,9 @@ Script which will be executed before packages will be installed. The configuration directory of the vserver which is going to be set up. - + -The pathname of the vserver binary. +The pathname of the util-vserver-vars file. @@ -242,7 +363,7 @@ The configuration directory of the vserver which is going to be set up. -The pathname of the vserver binary. +The pathname of the util-vserver-vars file. @@ -291,6 +412,11 @@ this distribution. + + +Symlink to the default template for this distribution. + + @@ -309,7 +435,7 @@ Path of the storage area for cached information about this vserver. ../.defaults/vdirbase/VSERVERNAME -Path of the vserver root directory +Path of the vserver root directory. @@ -322,16 +448,22 @@ the vserver is stopped, this can be a dangling symlink. -[experimental; name is subject of possible change] Contains the system capabilities. See -lib/bcaps-v13.c +Contains the system capabilities. See +lib/bcaps-v13.c for possible values. -[experimental; name is subject of possible change] Contains the -context capabilities. See lib/ccaps-v13.c +Contains the context capabilities. See lib/ccaps-v13.c +for possible values. + + + + +Contains the network capabilities. See lib/ncaps-net.c for possible values. @@ -352,22 +484,24 @@ the 'barrier' attribute. Else, common chroot(2) exploits are possible. - + -Overrides the global namespace-cleanup flag and disables +Overrides the global nonamespace-cleanup flag and enables namespace cleanup for the current vserver. - + -Enable namespace cleanup for the current vserver. +List of paths to skip during namespace cleanup. This overrides the global +namespace-cleanup-skip +file. - + -[experimental; name is subject of possible change] Contains the +[deprecated; use sched instead] Contains the scheduler parameters, one per line. The Hard CPU limit uses a mechanism called a Token Bucket. the @@ -433,7 +567,7 @@ Contains per line a capability. This file is used for the 2.4 kernel only; for 2.6 use bcapabilities. - + Contains the pathname of the shell which will be used by the "vserver ... enter" command. @@ -450,7 +584,7 @@ values. Contains per line a flag. See lib/cflags-v13.c +url="http://svn.linux-vserver.org/svn/util-vserver/trunk/lib/cflags-v13.c">lib/cflags-v13.c for possible values. + + +Contains a network flag per line. See lib/nflags-net.c +for possible values. + + -Contains the context which shall be used for the vserver. +Contains the context id which shall be used for the vserver. Valid range is 2 through 49151. + + +Contains the network context id which shall be used for the vserver. Valid range is 2 through 49151. + + + + +Contains the filesystem tag which shall be used for the vserver. Valid range is 2 through 49151. + + The fstab file for the vserver. Entries in this file will be mounted @@ -510,7 +661,7 @@ the 'fstab' file should be used. The fstab file for the vserver. Entries in this file will be mounted -within the network context of the host; this means that mount will be +within the network context of the guest; this means that mount will be called as chbind <options> mount .... See fstab also. @@ -532,7 +683,6 @@ Contains the init-style. - @@ -622,6 +772,13 @@ will be stopped before its dependencies. Content of this file are vserver ids (one name per line). + + + +The environment to set when starting the guest. Contains one VAR=VAL +pair per line. + + @@ -629,12 +786,12 @@ vserver ids (one name per line). 30 The timeout in seconds which is used when synchronising vserver -startup/shutdown with the vshelper. When no set, 30 seconds will be +startup/shutdown with the vshelper. When not set, 30 seconds will be assumed. - + restart The action which is going to be executed when a vshelper event @@ -691,7 +848,7 @@ skipped. -See vshelper/action. +See vshelper/action. @@ -770,16 +927,16 @@ environment variable must be set by one of the in-shellcontext scripts (the non-executable ones). - + -The scriptlet which will be executed before the network-interfaces are -enabled and the directories are mounted. Before executing the script, -the configuration directory will be made the working directory. +The scriptlet which will be executed before the root filesystem is mounted and +the configuration has been loaded. Before executing the script, the +configuration directory will be made the working directory. - + -The configuration directory of the current vserver. +The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). @@ -787,24 +944,60 @@ The configuration directory of the current vserver. The name of the current vserver. + + + + +Repository of initialize like scripts. Before executing the script, +the configuration directory will be made the working directory. + + + See initialize. + + + +The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + + + +The name of the current vserver. + + + + + + + + +The scriptlet which will be executed before the network-interfaces are +enabled and the directories are mounted. Before executing the script, +the configuration directory will be made the working directory. + + The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + Repository of prepre-start like scripts. Before executing the script, the configuration directory will be made the working directory. - + See prepre-start. - + -The configuration directory of the current vserver. +The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). @@ -812,11 +1005,6 @@ The configuration directory of the current vserver. The name of the current vserver. - - -The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). - - @@ -829,9 +1017,9 @@ been started. Before executing the script, the vserver root directory will be made the working directory. - + -The configuration directory of the current vserver. +The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). @@ -839,32 +1027,24 @@ The configuration directory of the current vserver. The name of the current vserver. - - -The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). - - Repository of pre-start like scripts. Before executing these scripts, the vserver root directory will be made the working directory. - + See pre-start. - + -The configuration directory of the current vserver. +The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). - The name of the current vserver. - - -The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). +The name of the current vserver. @@ -879,17 +1059,16 @@ started. Before executing the script, the vserver root directory will be made the working directory. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + @@ -900,17 +1079,16 @@ the vserver root directory will be made the working directory. See post-start. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + @@ -923,38 +1101,36 @@ stopped. Before executing the script, the vserver root directory will be made the working directory. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + Repository of pre-stop like scripts. Before executing the script, the vserver root directory will be made the working directory. - + See pre-stop. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + @@ -967,17 +1143,16 @@ interfaces disabled. Before executing the script, the vserver root directory will be made the working directory. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + @@ -988,17 +1163,16 @@ vserver root directory will be made the working directory. See post-stop. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + @@ -1010,17 +1184,16 @@ completely. Before executing the script, the vserver root directory will be made the working directory. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + @@ -1031,17 +1204,16 @@ the vserver root directory will be made the working directory. See postpost-stop. - - The configuration directory of the current vserver. - - - The name of the current vserver. - The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). + + +The name of the current vserver. + + @@ -1052,7 +1224,7 @@ The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). The default broadcast address. - The default network device. + The default network device. See iface/dev for more information. The default network prefix-length. @@ -1063,6 +1235,20 @@ The fixed value of the current action (e.g. 'prepre-start', 'post-stop'...). The default scope of the network interfaces. + + +When this file exists, the steps which setup and destroy a VLAN +interface will be executed for all interfaces of this vserver. + + + + +When this file exists, the steps which setup and destroy a VLAN +interface will be skipped. This overrides the global +vlandev setting for +this vserver. + + @@ -1077,13 +1263,13 @@ numbers like '00' are good names for these directories. - The ip which will be assigned to this interface. + The IP address which will be assigned to this interface. The broadcast address. - - The network device. + + The network device. When this is specified, the IP address will be assigned and removed when starting and stopping the guest. The network prefix-length. @@ -1112,8 +1298,15 @@ created by the host or another vserver. When this file exists, the steps which setup and destroy a VLAN -interface will be skipped. This flag should be set when a VLAN -interface is used by multiple vservers or by the host. +interface will be skipped. This will override the global +vlandev and the per-guest +vlandev. + + + + +When this file exists, the steps which setup and destroy a VLAN +interface will be executed. @@ -1122,24 +1315,23 @@ interface is used by multiple vservers or by the host. A directory with ulimits. Possible resources are cpu, data, fsize, -locks, memlock, nofile, nproc, rss and/or stack. This configuration -will be honored for kernel 2.4 only. - +locks, memlock, nofile, nproc, rss and/or stack. + A file which contains the hard- and soft-limit of the given resource in the first line. The special keyword 'inf' is recognized. - + -A file which contains the hard- of the given resource in the first +A file which contains the hard-limit of the given resource in the first line. The special keyword 'inf' is recognized. - + -A file which contains the soft- of the given resource in the first +A file which contains the soft-limit of the given resource in the first line. The special keyword 'inf' is recognized. @@ -1148,30 +1340,31 @@ line. The special keyword 'inf' is recognized. A directory with resource limits. Possible resources are cpu, fsize, -data, stack, core, rss, nproc, nofile, memlock, as and locks. This +data, stack, core, rss, nproc, nofile, memlock, as, locks, msgqueue, +nsock, openfd, anon, shmem, semary, nsems and dentry. This configuration will be honored for kernel 2.6 only. - + A file which contains the hard- and soft-limit of the given resource in the first line. The special keyword 'inf' is recognized. - + -A file which contains the hard- of the given resource in the first +A file which contains the hard-limit of the given resource in the first line. The special keyword 'inf' is recognized. - + -A file which contains the soft- of the given resource in the first +A file which contains the soft-limit of the given resource in the first line. The special keyword 'inf' is recognized. -A file which contains the guaranted minimum of the given resource in +A file which contains the guaranteed minimum of the given resource in the first line. The special keyword 'inf' is recognized. @@ -1205,7 +1398,7 @@ tools and can *not* be modified. - + The directory to which the limit should be applied @@ -1222,7 +1415,19 @@ tools and can *not* be modified. - + + + 'x' is an arbitrary name, replace it with e.g. integers + + The sysctl setting + + + The value + + + + + The name of the cpuset for this vserver @@ -1242,5 +1447,71 @@ tools and can *not* be modified. When this file exists, the cpuset will be assumed to exist already + + + + The initial amount of tokens to put in the bucket + + + The minimum amount of tokens required to unhold the context + + + The bucket's size + + + Amount of tokens to add each interval + + + The interval between refills of the bucket + + + Bias added to priorities calculated within the guest (result is clamped to -20/+19) + + + Amount of tokens to add each interval2 when advancing idle time + + + The interval between refills of the bucket when advancing idle time + + + When this file exists, advancing idle time is activated + + + This directory contains per-CPU and/or per-bucket specific settings. Remember to set the cpu-id file. All CPUs inherit the global settings. + + The initial amount of tokens to put in the bucket + + + The minimum amount of tokens required to unhold the context + + + The bucket's size + + + Amount of tokens to add each interval + + + The interval between refills of the bucket + + + Bias added to priorities calculated within the guest (result is clamped to -20/+19) + + + Amount of tokens to add each interval2 when advancing idle time + + + The interval between refills of the bucket when advancing idle time + + + When this file exists, advancing idle time is activated + + + The CPU to apply these settings to + + + The bucket to apply these settings to + + +